ijaers social
facebook
twitter
Blogger
google plus

International Journal of Advanced Engineering, Management and Science


A Review on Optimization of the Process Parameters in Friction Stir Welding of Aluminium Alloys (AA6082 and AA6105) by Taguchi Technique

( Vol-4,Issue-9,September 2018 )

Author(s): Sourabh Rohilla, Upender Dhull



Total View : 1024
Downloads : 165
Page No: 676-680
ijaems crossref doiDOI: 10.22161/ijaems.4.9.6

Keywords:

Friction Stir Welding, AA6082, AA6105, Process Parameters, Taguchi

Abstract:

This study is describing a simple and systematic methodology for optimizing the Process parameters of friction stir welding (FSW) of (AA6105 and AA6082) aluminium alloy using Taguchi technique. The main focus of this review paper is to discuss FSW principle, process parameter and mechanical properties. The current study focuses on the friction stir welding of wrought aluminium alloys 6082 and aluminium alloy 6105 that are commonly used in the structural and automotive industries. Apart from this paper FSW process has been done on various aluminium alloys but dissimilar friction stir welding of these two materials are not reported in their research. A systematic study has been performed on the joint properties on the dissimilar welding of the selected materials and their relationships between various parameters.

Cite This Article:
Show All (MLA | APA | Chicago | Harvard | IEEE | Bibtex)
Share: