DOI: Google Scholar Analysis
For Authors
ijaems Issue
Design and Manufacturing of Press Tools for Compressor Shell( Vol-2,Issue-10,October 2016 ) |
|
Author(s): V.Mallikarjuna, Dr. B.James Prasad, S.Md Jameel Basha, K.Rajesh |
|
Keywords: |
|
|
Compressor shell, Lower Housing Shell, Thick Hot Rolled Strip. |
|
Abstract: |
|
|
The role of Sheet Metal has become very prominent with the use of Press Tools. It is one of the fundamental forms used in metalworking, and can be cut and bent into a variety of different shapes. Countless everyday objects are constructed of the material. Thicknesses can vary significantly, although extremely thin thicknesses are considered foil or leaf, and pieces thicker than 6 mm (0.25 in) are considered plate.The project deals with Compressor Shell Lower Housing. The Compressor Shell holds all the parts of the compressor in pre-defined location for the compressor to fool proof. The component should be freed from burrs and also to dimensional accurate. The outcome component is been inspected in the Quality department so as to check the Dimensional accuracy is been achieved. |
|
Cite This Article: |
|
| Show All (MLA | APA | Chicago | Harvard | IEEE | Bibtex) | |
Share: |
|
DOI: 
