ijaers social
facebook
twitter
Blogger
google plus

International Journal of Advanced Engineering, Management and Science


Optimization of Process Parameters in WEDM by using Taguchi Method

( Vol-2,Issue-7,July 2016 )

Author(s): Suresh Kumar, Sumit Jain, Amit Ahlawat, Preety Rani



Total View : 667
Downloads : 13
Page No: 1172-1176
ijaems crossref doiDOI:

Keywords:

Wire electric discharge machining (WEDM), material removal rate.

Abstract:

This research represents the parametric optimization of Wire EDM on machining die steel DC53. The objective of the present work was to investigate the effects of the various Wire EDM process parameters using Taguchi on the machining quality and to obtain the optimal sets of process parameters so that the quality of machined parts can be optimized. The machining parameters selected for present research were Pulse on time, pulse off time and wire feed. A series of nine experiments were conducted using Wire EDM. The ANOVA was employed to analyze the influence of these parameters on Material removal rate during machining process. The results showed that the input parameters setting of pulse on time at 120µs, pulse off time at 60µs and wire feed at 6mm/min have given the best results for optimization of Material removal rate.

Cite This Article:
Show All (MLA | APA | Chicago | Harvard | IEEE | Bibtex)
Share: