ijaers social
google plus

International Journal of Advanced Engineering, Management and Science

Wire Feed Rate Optimization for MIG Welding of Alu-minum Alloy 6063

( Vol-8,Issue-7,July 2022 )

Author(s): Arun Pratap Singh, Dr. Shahnawaz Alam

Total View : 459
Downloads : 169
Page No: 01-13
ijaems crossref doiDOI: 10.22161/ijaems.87.1


MIG Welding, Surfacing, Aluminum Alloy 6063, Factorial design approach.


MIG welding (metal inert gas welding) is an arc welding technology that generates metal coalescences by heating them with an arc between a filler metallic electrode that is constantly fed, and the work. MIG welding process lends itself to semiautomatic, robotic automation and difficult automation welding packages. The alloy fabric variety for GMAW consists of carbon steel, chrome steel, aluminium (Al), magnesium (Mg), copper (Cu), nickel (Ni), and silicon bronze. This experimental study aims at optimization of the wire feed rate during MIG weld of aluminium sheets by developing the mathematically model for the tensile strength a hardness of the aluminium specimen. In this experiment Factorial design approach has been implemented for locating connection among diverse procedure parameters and weld deposit reason. MIG Welding of aluminium alloy 6063 with Al 4043 Wire and Argon gas shielding yields excellent results.

Article Info:

Received: 03 Jun 2022; Received in revised form: 25 Jun 2022; Accepted: 03 Jul 2022; Available online: 11 Jul 2022

Cite This Article:
Show All (MLA | APA | Chicago | Harvard | IEEE | Bibtex)